new cam bearings, lubed it with lithium grease, primed the engine before starting. Using 10w 30 oil... I know there is a check valve by the oil filter in the threads. Or that if the spring goes in the pump it would do something like that as well. If its as bad as I think bearing are wiped. But this simple fact tell me other wise. pick up to oil pump- oil filter-check valve- pressure switch(where I tapped in) - main bearings and rod bearing- lifters and cam bearings, rocker arm case finally oil pressure gauge.......................... reading at the top was crap and the reading before was the same.......... so its a pressure prob right at the source.......... worse case senario she's coming back out going right to the machinist. but if I'm lucky oil pump might have something up with it or the pick up. Plus Im gonna check the rod and main bearing with a plasti gauge.......... and change the check valve. Maybe upgrade to A high volume and or pressure pump...........................
will find out tomorrow
Kenny