Printable View
I recently purchased a 1966 Chevy Caprice. I have decided to restore it and have begun the process. It used to have a 327 but has been replaced with what I believe is a 350! After pulling the engine and tranny today, I wrote the numbers down and hope you all can help me I.D. them so I can start the rebuild! Here are the numbers:
Engine:
3970010 (the 1 caould also be: A/M/H/I ???)
V0808TKT
Tranny:
CFM 8640831 GM-2
Any and all help is greatly appreciated!!!
Chris
3970010 block is a four inch bole large main bearing unit produced from late 68 into the late seventies. It is one of the most common of these blocks. It was used as 302-327-350 base. As for the trans what is the shape of the pan? square (powerglide) or square with one corner cut short (350 turbo).
The tranny is square with like a 45 degree angle cut on the one corner.Quote:
Originally posted by BOBCRMAN@aol.
3970010 block is a four inch bole large main bearing unit produced from late 68 into the late seventies. It is one of the most common of these blocks. It was used as 302-327-350 base. As for the trans what is the shape of the pan? square (powerglide) or square with one corner cut short (350 turbo).
So the block is a 350? If so, then what is the VO8OTKT mean?
Thanks for all the help!
here is a link donr know if it will help www.mortec.com
This has got me all confused, lol! So with those numbers, what would I say is in the ride??? I need to know what to look for when getting parts and such, lol!
350 Chevy with 350 turbo. Zillions of em out there!!
Everytime I try to get parts the "parts guy" always asks for the year and make. I can't give the actuall info because a 350 isn't an option.Quote:
Originally posted by BOBCRMAN@aol.
350 Chevy with 350 turbo. Zillions of em out there!!
Chris