Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree11Likes
  • 1 Post By Hotrod46
  • 2 Post By 53 Chevy5
  • 2 Post By rspears
  • 2 Post By cffisher
  • 2 Post By 40FordDeluxe
  • 2 Post By TOW'D

Thread: how to test for a cracked block
          
   
   

Reply To Thread
Results 1 to 8 of 8
  1. #1
    TOW'D is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Bella Coola
    Car Year, Make, Model: 1948 Thames E83W- and many others
    Posts
    788

    how to test for a cracked block

     



    Howdy Gang,
    We have a 496 engine in a Jet boat. The boat was washed down the river during a flood. It sat all winter long before we were able to remove and strip down the engine.

    The engine had just 14 hours on it but after the flood it was full of muddy water.
    We scattered it and cleaned everything- new bearings --plastigauged to check the factory specs. New gaskets and head bolts.

    we did lap the valves, when the engine was put back together we spun the it over while it was still out of the boat and got good oil pressure with the test gauge.
    Everything looked real good or so we thought.


    we just put fresh water in the header tank but hear the water leaking into the base.


    Any idea where to look for a leak-- or some method to pressure test it.
    I haven't tried to pressure test the cooling system and could plug all the ports and test it that way. Maybe adding a dye to help .

    I had a thought that maybe the head gaskets were not the correct ones.

    Just want some ideas before ripping it apart
    thanks
    Hank
    `
    .

  2. #2
    Hotrod46's Avatar
    Hotrod46 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Vidalia
    Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
    Posts
    1,496

    Check with an automotive machine shop. There is a setup that can be used to pressure test a block while it is disassembled. Not all shops will have it. One of the guys that helped develop it lived down the street from me when I was a kid, so it's been around for a good while.

    Look in the lifter valley and along the sides of the block in motor mount area and all along the line formed by the so-called "freeze plugs".
    TOW'D likes this.
    Mike

    I seldom do anything within the scope of logical reason and calculated cost/benefit, etc-
    I'm following my pass​ion

  3. #3
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    Blocks seldom survive freezing with water in them, they are usually cracked somewhere. You could cap off all the water ports and apply about 15 lb pressure to the cooling system. Remove the oil pan and watch for water .If it comes out of anywhere but the head gasket, put a fork in it, it's done
    Dave Severson and TOW'D like this.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  4. #4
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,989

    My first thought is that if you've got a big enough leak to hear the water it's not gonna be a head gasket, and you're likely wasting your time on a severely cracked block but both Mike and Seth gave good advice.
    TOW'D and glennsexton like this.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  5. #5
    TOW'D is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Bella Coola
    Car Year, Make, Model: 1948 Thames E83W- and many others
    Posts
    788

    thanks guys
    must be the time to look for another engine
    Hank

  6. #6
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    A few years ago a friend of mine had a boat with an IO the engine would fill up with water while sitting at the dock. We took it apart several times checked every thing we could. Finely a shop said it could be in your exhaust headers. We tried testing them several ways but just couldn't get it right. The owner made a deal with a shop that had a used set on the shelf. We put them on and all was good. Just something to try cheaper than a block but not by much
    TOW'D and glennsexton like this.
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  7. #7
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,264
    Blog Entries
    1

    I'd check the exhaust manifolds for sure. Since they are water cooled there is a good chance they are cracked. My Dad had similar issues on his I/O pontoon boat and his intake and exhaust manifolds were cracked due to the previous owner never winterizing it.
    TOW'D and glennsexton like this.
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

  8. #8
    TOW'D is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Bella Coola
    Car Year, Make, Model: 1948 Thames E83W- and many others
    Posts
    788

    The crank and all the rotating parts look good so I'll try to find a block -after I test the manifolds
    thanks
    Hank
    Dave Severson and cffisher like this.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink