Thread: Edelbrock cross ram Manifold.... .X-C96

Tweet

Originally Posted by Jon B

I am building a 496 Stroker with a Edelbrock Chevy Cross Ram X-C96 intake . I'm using a pair of 500 Edelbrocks. I'm wanting to put it in a 1930 to 1932 A model. I'm still in the process of getting all of the engine componets together to send to the machine shop so I haven't ran into that problem yet . if you get time post some pics of your progress.

when it comes to a cam this engine think about the stall if your going auto trans . better to be tame on the cam as in a very lite car you allways need more stall then you would think i built a 548 14to1 .roller cam mild 750 lift low 270 at 050 lsa 108 used a very loose9inch convert tries never hooked you just brunt them off threw 3 gears long as it was somewhat straight there is really no need to lift