Thread: 468 Build

Tweet

hey everyone,
new to the forum here and am looking for some help/information.
i have read through a few threads here and looks like there is a bunch of knowledgeable people here.
this motor will be going into a 69 firebird it will be street driven and see some drag strip action. im hoping to get in the 650 hp/tq range or more if possible.

i have a bbc 454 that im going to have bored .60 over to a 468, the block is a 4 bolt main block. i plan on keeping the stock stroke.
im going to have the crank polished and recondition the rods to save some money.

im looking to run some aluminum heads , probably in the 115cc range with a runner volume of 300cc - 320cc, and i was looking at a -20cc or -30cc domed piston with a .040 head gasket.
Rectangle ports or Oval ports? not sure, but was leaning towards the rectangle ports

going to run an RPM intake.

i have no idea on cam or carb size. i have read that i should splurge and go roller cam. and ill use roller rockers as well.

any help or suggestions or any info would be greatly appreciated.