Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree2Likes
  • 2 Post By Richy

Thread: 496 Stroker
          
   
   

Results 1 to 7 of 7

Threaded View

  1. 12-23-2013 09:05 AM #1
    1972chevy
    1972chevy is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Dec 2009
    Location
    Corona
    Car Year, Make, Model: 1964 Chevy El Camino
    Posts
    30

    496 Stroker

     



    Ok so I dumped my 396 this weekend and picked up a 454 block bored to 4.310 and a set of JE Forged Flat top pistons for $600 bucks. The block is all ready to go along with 4 bolt studded mains. I Have stock heads with 98cc chambers and 2.065/1.720 valves. I would like to go to 2.190/1.880 valves on the heads. I plan on running a 4.250 stroke crankshaft and 6.385 rods to make a 496 stroker. So once again I am looking to build this motor for off road use and street looking for around 500/500 or more. Any help would be nice.

    Cast or Forged, looking at a Eagle cast steel crank ESP-104564250 and some 5140 rods from Eagle ESP-6385B as well. What do you guys think

    Thanks
    Last edited by 1972chevy; 12-23-2013 at 12:25 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink