7Likes
Thread: 402
Results 1 to 5 of 5
Threaded View
-
11-20-2013 06:36 AM #1
402
So im looking for some more info, im sticking with building my 396/402 bbc engine. it will be bored out to 4.154 or 4.155, i plan on using Federal Mogul rebuild kit CSMHP716-611 from summit racing, it has Hypereutectic pistons with a -21.00cc dome and a 1.760 comp. distence, COMP Cams Xtreme Energy Retrofit Cam and Lifter Kit K11-413-8 which is 264/270 .510/.510, COMP Cams Magnum Rocker Arm and High Energy Pushrod Kit RPR205. I will be running stock 215 heads they have 98.4cc combustion chamber. So my question now is should i up size the valve size on the heads or leave them stock? Should i use Main and Head studs or just plan bolts? ARP of course. MSD Ignition system with a 6AL box. What size carb should i run? What intake is best? Will be running a 700r4 trans this will be a 4X4 truck running 33 inch tires and more and likely 3.73 gears. Im only looking for around 350-450 HP. Instead of the 500-500 i was before.
Thanks
I've had a lot of BIG things happening to me lately but now I'm back to working on the car some, it feels good! The tranny mount was bad and that helped put everything back where it should be....
SB distributor won't fit