As the title says can you use an early block 361959 cast number with later heads 10140279 cast number ?:confused:
Printable View
As the title says can you use an early block 361959 cast number with later heads 10140279 cast number ?:confused:
if that head casting is a mark 5or6 head then yes i do not use the new heads much .it works this way. better then the other way new block old heads you need to use the felpro f1037 or f1047 the f 1037 is for under a 4.540 bore you need a head gaskets that has the new water port print out same has heads as the head gakets. one.s i listed do
Thanks I'm going to take that as a yes if I use late head gaskets.
well i have only used the felpro. numbers i listed it has both print outs on the head gasket new and old deck there is a lower water port hole 1/2 to 5/8 that may needed to be drilled in the engine deck .the paper instruction with head gasket out lines thisQuote:
Originally Posted by manky