Thread: cam help

Tweet

Originally Posted by ratitude

PAT thanks i wasnt shure what the differnce was between them and ill use a markIV cam then as for cam ide never use a hyrd roller cam only a solid roller i didnt look specs up but around 270 int 280ex at.50th it was right around 700 lift it was around 4 to7600 rpm range for use maybe the strip once just to see what itll do if it hooks up but mainly pleasure on the street not a daily driver roll cage no heater back seat is all tubs 488 gear in a nova i dont mind pullen lifters every winter to inspect or replace them i just dont want to worry about them thought maybe those isky ones were the answer

i used many cams this size on the street for 30 years . run good oil like brad pen with zinc use the crower hippo roller lifters can go solid bearing iskys thats a upgrade on a red zone thats a $1200.+ roller if you did not buy the block you could have dart set it up for a bigger lifter use a jesel roller lifters . in the past i just used the crane bulk lifter run them .then pull them before they fail . if you need any thing let me know i have all the parts and heads 335.345 and 355 . and all the parts to build the short block new with a 4.250 or 4.375 crank so 540 to 580