Has anyone used or work with this cover? looking at how the one piece felpro 1884R oil pan gasket was going to seat,and the gasket is not seating right, would the oil pan go on first? feel free to bust my b---s if you see Im doing this wrong.
Printable View
Has anyone used or work with this cover? looking at how the one piece felpro 1884R oil pan gasket was going to seat,and the gasket is not seating right, would the oil pan go on first? feel free to bust my b---s if you see Im doing this wrong.
i hate one pc gaskets on mark IV bbc there no need for them . good felt set work fine . you will need to re work that gasket with a razor and some RTV in them spots only
Thanks Pat, just got off the phone with comp cams, they said I should be using a pan gasket from SCE ? I also called summit and they did not have a clue of what I was telling them. Dont know if Im doing it wrong, or if everone modifys the gaskets for these covers, its not just the one piece gasket,the 4 piece rubber and cork is not seating right around the timing cover also. Going to try to find the right gasket, and last resort bust out the razor.
just call me i tell you how to do itQuote:
Originally Posted by stinkydidit