I use to want one so bad, to have that, sound. Now I think I could not stand it very long. So who has one? you like it? what are the pros/cons of them?
Printable View
I use to want one so bad, to have that, sound. Now I think I could not stand it very long. So who has one? you like it? what are the pros/cons of them?
There was a time that I thought I wanted one too, but everyone on here talked me out of it, and I am glad they did. It seems everyone feels that way, puts one in, then pulls it back out after a while. That is why you see so many used ones for sale. They aren't all they are cracked up to be.
Don
The guys that seem want them just want the sound which is close to that of a blower. In most cases the engines are not built to anywhere near the level that a gear drive offers any advantage.
To me when I hear the sound from the car and all it is a gear drive all it does is scream wannabe.
Don't. Do. It. If you want the sound, buy a CD and put it in your stereo. Seriously.
I have a Pete Jackson gear drive in the Thames ........ and it was not installed "for the sound" ........ I have seen too much damage caused by slipped or broken timing chains and I just don't trust them .......... and I honestly have gotten used to the whine :D:D
there junk less its a single idler gear one there about $600.milodon .donovan .and other make the race single idler gears one s, the cheap ones are hard on valve train valve springs other parts .but if you feel the need to bolt a P.O.S nose maker on your engine good luck with it. if you bust a good chain set and ...you will not ...you have other things to worry about. i have seen rods hanging out of engines with the chain set still intact
for a street machine i think there alright..BUT.. If you have any engine that will see higher rpm levels they could be a problem.
I had one come apart at 8200rpm once. ended up costing me more money in the long run than the cheap thing did in the first place..
Afew yrs back,if you wanted a whine,I could have loan ya a ex.:eek:Have her ride shotgun...........That's about all the whining anyone could stand.:rolleyes::LOL::LOL:
I did once and was sorry about it as soon as I started the motor for breakin as I was expecting to listen for various engine noises which were all masked by the gear drive. There are places for them and reasons as well, but not in my humble opinion, for the average engine that may see occasional strip duties.......
most all out race engine use belts or chains . top fuel and a small hand full of guy s use the single idler gear drives . not the two gear idler type. all the race engines i build for my customers get a belt or a hi quality billet gear set like Rollmaster timming set have used this chain setup many times on engines with over 250 on the seat and open past 700lbs .on valve springs with no failures of chain .. no engines i build for anyone will leave my shop with a PJ gear drive there alot of bad things they added to a engine that i will not get in to .as i have in the past on hereQuote:
Originally Posted by emil