Quote Originally Posted by pat mccarthy View Post
i can tell you a nice cam will make good power have abit of sound will work with a small stall 2500, you need 9to 1 cr headers.howards cam hyd roller 228/236 595/602 110 or the erson grind as very close about the same but 602/602 used it or if you want more cam you need 10to1 + and will have low vacuum erson cam 627/627 238/246 112 have this instock 4/7 swap used many of this cam needs abit more stall

Pat, I'm not sure what the cr is on my setup, It's basically a stock rebuild. Pistons are flat tops and heads havent been milled any, just surfaced. It's actually assembled ready to go in the truck with an erson rv cam in it but I'm gonna change it out before stabbing the engine.

Current cam specs:lift intake/exaust : 492/492
duration advertised : 288/288
duration @ .050 : 214/214

I dont mind running a good converter , I was thinking 2500-3000 just to make it more fun to drive. I've got a 3600 stall in my daily driver 03 silverado