The rear main seal position, if Im rearing package right, set in,
off set 3/8 in ? not flush with block? it is a two part rubber seal. I know this is easy stuff for you guys.
Printable View
The rear main seal position, if Im rearing package right, set in,
off set 3/8 in ? not flush with block? it is a two part rubber seal. I know this is easy stuff for you guys.
I install the rear mains with the parting lines @ 1 o-clock & 7 o-clock.Also be sure the lip of the seal is towards the inside of the engine.
Thanks, worked out fine, crank turns nice. Next up pistons and rods.