Im doing a 540 build for the street out of a dart block. 10cc diamond pistons, compstar crank and rods. Anyone have the AFR 357 heads on a similar build?
Printable View
Im doing a 540 build for the street out of a dart block. 10cc diamond pistons, compstar crank and rods. Anyone have the AFR 357 heads on a similar build?
done many with dart cnc heads no AFR s just did get of 10cc diamonds pistons made for a street 567 going with the cnc 355 . used many heads over the years on 540 and up builds some with big chief . BMF .and 861 bowties and GM heads and others .i done alot with the scats cranks/rods and done some with comp star cranks .like the 8 plate crank. scats have jump up on price it seams so i am using more comp starsQuote:
Originally Posted by Trueblue
thanks, I forgot to say the cam was .273 at .050 at .640 on a 110, 318 adv.
abit small on lift ? that with out lash ? cam close to some cams i used on the street but more lift the Lsa is 110. ok whats 318 adv?
318 degrees duration @ advertised (0.006" tappet lift).Quote:
Originally Posted by pat mccarthy
yep i know that advertised :rolleyes: ADV is how Erson saids were they want the intake center. let s say 4 Av intake intake center line is ADV sOOOooo it would be 106. so in short your cam would be 318/318 .@050 .273/.273 lift 628/628 lsa 110 ADV 4 would be 106 intake center line so when i seen it. what is the way i seen it. was i giving him a hard time maybeQuote:
Originally Posted by techinspector1
yep there are somethings that when shortened appear to be something else--
ADVertised======ADVance
WTF=====has a presidential order to mean Win The Future!!!!!!
In Alaska--- WTF ---Sarah says will remian what it has been universally accepted!!!!!
yep WTF:3dSMILE::3dSMILE:BMF and POS .AMF . and NFG
Its a clay smith flat tappet, he wants me to put a 1.8 rocker on the intake.
roller cam is the only way to go on a BBC . why not buy a cam that has more lift then 1.8 rockers ? there is other cam grinders. Erson. Howards. Comp .is this a cam you have or going to get ?Quote:
Originally Posted by Trueblue
It showed up last week. My last two cams were Erson and Howards and they worked well. I dont want a roller. I want to put it together and leave it together. My 496 was in the 10s on 9.5 compression and a flat tappet solid. I should be able to make 750hp on this 540 with good heads.
HMMM, somehow or another, I see a disassembly in your future. When you ignore the advice of a professional engine builder like Pat, you're gonna have to learn the hard way. Just keep pokin' that bear with a stick!!!Quote:
Originally Posted by Trueblue
Not that you'll pay any attention to them, but here are some guidelines for installing a flat tappet cam....
http://www.crankshaftcoalition.com/w...ips_and_tricks
Hmmmmm have a AX to grind .did i say you were not going to make 700 hp . that nice you had a 496 that ran 10s on 9.5 CR . your buying good heads and top of the line pistons and putting a flat lifter cam in i just do not get it ? good luck any ways i used direct lube lifters when guys had to run solid howards and erson make big hyd rollers that will say together if you use a short valving hi rpm roller lifter or a solid roller with a set of hippo roller lifters .i can say my cars are not running hippo rollers lifters when i go thru them i use some .i ran rollers on the street for 20+years i never lost one .built many bbc with rollers hyd and solid roller camsQuote:
Originally Posted by Trueblue
The cam that was in the 496 that I sold had a howards cam in it with direct lube lifters. I had that block indexed on a cnc with bronze bushings for perfect alignment of the lifters. I kept the first cam and lifters in order that I took out, because the lifters didnt have a scratch on them. The car was 3500 with me in it and had a tremec 5spd. Best time was a 10.86 at 127.96. Not to bad for 87 octane and letting of the gas three times down the track to be easy on the drivetrain. Going through at 6300 rpm with a 28 tire and 4.11 gear. This new motor should get me a low 10 at least with alot of clutch and firm shifts. Thanks
the last 540 i built ran 8.50 at 150
I dont own a truck or trailer
Ok :D that 540 did not need a trailer i ran the same engine on the street for 3 years but mine was a iron head engine . that one was a dart CnC heads box stock holley single carb.. No ... Nos ...3 speed 400 trans power eater... you did have to run good fuelQuote:
Originally Posted by Trueblue