Thread: 468 build questions

Tweet

You may want to check out the Lunatti Voodoo .575 roller

Originally Posted by emil

You may want to check out the Lunatti Voodoo .575 roller

i have checked out alot of the lunati line and I must say that they are proud of their cams. I don't think I can spend $320 for the cam, I am really leaning towards the Howards brand. They have roller cam/lifter combos for just over $500. I haven't heard anything bad about them so far other than that my max rpm will be limited with these lifters, but I don't plan on spinning the motor past 6,000 and they say they are good to 6,500 rpm. Comp recommended a marine cam with around 240 degrees at a .050 with .566 lift. Howards has a cam with the same duration that has .612 lift so I might go with that but will definately need a converter and some gears.