Thread: I goofed up somewhere (fuel problem)

Tweet

Originally Posted by buzz4041

If you cut the tube with a tube cutter you need to ream the tube after to leave a smooth inside edge or else you have just reduced your tube size and are possibly starving for fuel flow. Also if not reamed properly you may have dislodged a piece of the wall and it is in your carb filter now.

Considering how bad the previous piece was mangled, I don't think this will be an issue lol

http://www.fuelslut.net/ihost/files/...edfuelline.JPG

The end of the line looks exactly like the cut edge of this one.

I checked for burrs and a soft edge, but there weren't any, so I didn't bother reaming.

I'll get to the bottom of it when I get to the shop in a few hours...