Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 454 build
          
   
   

Results 1 to 13 of 13

Threaded View

  1. 01-25-2010 11:32 AM #12
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by chevster View Post
    I have a set of 049 heads off my 454 BUT it is a 2 bolt main..
    Any problems with a 2 bolt main pushing 600hp?
    And how much does it usually cost to get a set of 049 heads with 2.19-1.88 valves and some porting and bowl work? thanks
    no two bolts are ok .hard to say on heads what they need. you should go to your machine shop . i get $ 30 hot tank and mag $ 70 mill heads 140 valve job 4 angle on intake and full radius + one angle on EX and go in and bowl them out has well $125 .then its up to you for guilds iron is $128 or mag bronze as bronze is more money but a better guild for hp i feel . then cutting for PC seals and spring set$60 up so it not hard to put 600. in them or more
    Last edited by pat mccarthy; 01-25-2010 at 11:47 AM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink