Started to do my homework and this is what I've come up with so far... Gmpp block (short) assuming a 0 deck height (with a 4.250 crank, is that possible/likely?)...
for rotating assy, scat p/n SCA-1-42450BE, using 6.135'' forged H beam rods, 4.250 forged crank,
pistons are KB p/n UEM-KB224-STD, which is a hypereutectic flat top 3cc relief piston,
heads are AFR-2010 heads, rec. intake ports at 357cc, round exhaust ports at 124cc, heart shaped 121 cc chamber, .750 max lift.
power adder weiand 8-71 p/n WND-7186 roots super charger
SCR with this at the 0 deck and a .038 head gasket is 8.55.
will this setup work? anyone with a desktop dyno for a guess at some numbers?
What should I look at for a carb (pair) cam and stall converter for this setup? (going into a 67' cutlass approx 3400lbs, 3.73 gear ratio on either a th 350 or turbo 400) Thanks for the advice and direction guys
V/R
ET3