-
help !!!!!!!!!!!!!!
Hello ,
I have a 461 big block chevy , Steel crank , forged dome pistons.
Edlebrock aluminum heads 714 lift cam (Crane)1100 hardcore dominator.
high rise eddlebrock intake , 350 long tail tranny with all the work needed .
3800 stall 410 gears . In a 1975 chevy caprice convertible car aprox weight is 5500 lbs .
What I need to know is , can I cruise the car on the street once in a while ???
I am open to advise , I need someone that knows what they are talking about because I am a begginer .
Thank you for your time !!!
-
You need to know the compression of the engine and what octane gas it needs......but to answer you question...you can cruise anything on the street,just depends on what you want to put up with.
http://www.youtube.com/watch?v=Qk7Zh...om=PL&index=83
-
Thanks for you reply , the motor is around 13 to 1 runs on 110 octane .
another question , what is the ideal temp. on a big block ?
Thanks
-
you need to re work your build 5500 lbs and a 3800 stall thats a heat maker
-
-
Hello Pat ,
what do you think about the rest of the combo ?
-
5500 lbs:eek: a max TQ grind cam and not try for MAX hp for pulling that big boat .BIG CID IS WERE I WOULD GO .PAST 500 cid on pump gas:3dSMILE:drive it any were and have fun
-
What't the best operating temp. for a big block ????????
-
how hot is it ? on a hot days i have had them run at 200 so that ok but 180to 190 were i like them to be at
-
I am still finishing the car but so far it stays in that area .
any advise on what helps keep it cool ??
-
But I have not done any real driving on the street , and I would like it to run at 180 at all times .
Thanks
Sixto