will a 400sb fly wheel work on a 454 bb chev? rd
Printable View
will a 400sb fly wheel work on a 454 bb chev? rd
NO it will not
Pat, on this I respectfully disagree. To my knowledge GM put only turbo 400's behind sbc 400's. Also these are the only two engines which are externally balanced and a flywheel from a 454 will work on a 400 as that is what I used on the 400 I had in a '62 pickup. Therefore I see no reason that a 400 flexplate would not work on a 454.Quote:
Originally Posted by pat mccarthy
well that ok i respectfully disagree with you:3dSMILE: i have balanced ex bbc454 502 and 565 and we used the external 454wheels . the 383/400 sbc wheels are not 454 wheels. there different part number for them from gm any one that sell the flex plate or fly wheel. there are more then one 454 wheels the mark 4 and 6 flys are not the same. as a 400 sbc if your spinning the crank and re balancing with the 400 wheel it could work other then that it is not the same as the 454 mark 4 or 6. the weight is not the same from sbc 400to 454 it will bolt up that still will not make it rightQuote:
Originally Posted by NTFDAY
They have different part #'s and the weights are obviously different sizes.
When I get the chance I will take a picture of the 454 flywheel that I have in the garage. It was bolted to a stock 400 sbc, which I also still have, and I never had a bit of a problem with it.Quote:
Originally Posted by pat mccarthy
Guys, please school me, I wondered about this as well.
Common sense to me says that "externally balanced" means there is weight either added or removed to the flywheel to balance the internal engine spinning components. For example, A 400 FW may have FW weight added at the 2 o'clock position, whereas a 454 FW may have weight added at the 6 o'clock position.
Just because the FW's are interchangeable, does not make the engine correctly balanced... true?
.
[QUOTE=Gusaroo]Guys, please school me, I wondered about this as well.
Common sense to me says that "externally balanced" means there is weight either added or removed to the flywheel to balance the internal engine spinning components. For example, A 400 FW may have FW weight added at the 2 o'clock position, whereas a 454 FW may have weight added at the 6 o'clock position.
Just because the FW's are interchangeable, does not make the engine correctly balanced... true?
In the case of the 454 flywheel I have there is extra weight added in comparison to a 283 flywheel which is what I was comparing against.
It is an extension of the counterweight.
As I stated before, to my knowledge, GM used automatics behind every 400 sbc produced and therefore if you wish to run a manual transmission behind a stock 400 sbc you have to use an externally balanced flywheel.
I see what your saying NTFDAY, the FW is needed for the clutch assembly but...
Is the added weight on the 454 FW the same AND in the same spot as on the 283 FW?
Why not use a flywheel weight like this?
http://cgi.ebay.com/SBC-383-400-Chev...3286.m20.l1116
.
On the one I have it's an extension of the counterweight on the 283.
I would assume that what you listed from ebay would work and it would be less expensive.
This is a picture of the one I have.
Guys, thanks for the info; however I am still a little confused...I have
an alumunim 400 manual flywheel, and a 5 speed Doug Nash Manual
Trans, and was possibly thinking of putting the two together. If the
400 FW would work, would the front balancer also have to be changed.
r dobbs
rdobbs, Please don't take my posts as advice. I am just as confused as you are on this one...
Sit back and wait, the "guys in the know" will be by soon enuff. :)
gm and any one that makes a fly wheel have different part numbers for a 454 and 400 they are both external wheels .BUT THEY ARE NOT THE SAME IF SO GM AND ANY ONE THAT MAKE THEM WOULD SELL ONE PART NUMBER THEY DO NOT .I DO THIS STUFF FOR A INCOME I HAVE BALANCE ENGINE AND PUT HEAVY METAL IN CRANKS I DO NOT CARE IF YOU WANT TO TRY IT BUT A 454 WHEEL IS NOT THE SAME AS A 400 WILL IT WORK? WELL IT COULD . I LIKE TO GET ANY THING I BUILD AS CLOSE AS I CAN 1TO1/2 A GRAM. IT WILL NOT BE WITH A 400 FLY WHEEL ON A 454 OR A 454 WITH A400 FLYWHEEL. NOW DO NOT TAKE MY WORD JUST LOOK IN A GM PARTS BOOK OR ANY ONE THAT SELL FLY WHEELS .YOU NEVER TOLD ME WHAT 454 WHEEL. YOU DO KNOW THERE TWO WHEELS FOR THE MARK4 AND 6 SO WHAT WHEEL WORKS ON A 400SBC? WELL THE PART NUMBERS ARE NOT THE SAME OR THE COUNTER WEIGHT:3dSMILE: GM #3986394 CLUTCH DIA 11. RING TEETH 168 FOR SBC EX 400..gm 454 WHEELS 3963537 .3993827 HAVE FUN GOOD LUCK
To the best of my knowledge the flywheel I posted the picture of came off a 454, at least that's what I was told when I bought it.
I put over 10,000 miles on the 400 sbc it was bolted to.
Tomorrow I will post the part # cast into the flywheel so that it can be figured out just what it was originally designed for.
well it very well could be a 454 and for stock use it very well could of work. but i think the 454 has more conterweight even the balancer bolt on heel plates they sell to make a internal fly wheel to work have to numbers for the 400 and 454