Thread: New to the BBC scene...need advice

Tweet

just all stock parts is fine no need for a hv oil pump i would use moly rings a good valve job them heads are the better casting for hp. i would O deck the block and cut the heads . a RV cam would do the job. i would use a roller cam .one of them take outs for $40 from comp. if they still have them . the retro lifters and front cam plate with the mark 6 chain set retro pushrods and you good to go. but you will have to run a electric fuel pump or buy a cam that the core has a fuel pump lobe on it to run the mechanical fuel pump it will blow the tires off the back of the car with a very mild 454 in good tune