What should I get??

Printable View

Show 40 post(s) from this thread on one page

04-28-2008, 10:56 PM
pat mccarthy

merlin III and a callies magnum crank and srp pistons or ohio crank 8 plate crank with there I beam rods with the arp2000 bolts
04-28-2008, 10:59 PM
camaro76_454

Quote:

Originally Posted by pat mccarthy

merlin III and a callies magnum crank and srp pistons or ohio crank 8 plate crank with there I beam rods with the arp2000 bolts

Why dont i need H beam ?
04-28-2008, 11:07 PM
pat mccarthy

Quote:

Originally Posted by camaro76_454

Why dont i need H beam ?

why would you? you can if you want i have used many sets of H beams they are cheap. i have used both. the i beam is lighter you should talk to your builder he can help or tell you what he want to use in your build
04-28-2008, 11:09 PM
camaro76_454

Quote:

Originally Posted by pat mccarthy

why would you? you can if you want i have used many sets of H beams they are cheap. i have used both. the i beam is lighter

ok as you say:o
04-28-2008, 11:16 PM
pat mccarthy

crower. howards. lunati .oliver and ohio make I beam rods and some other to .the H beams work good for the money eagle wheeler cat scat ohio and many more i have used all of them . the carrillo H beams are the real deal and some others but are $$$$$
04-28-2008, 11:17 PM
camaro76_454

Quote:

Originally Posted by pat mccarthy

crower. howards. lunati .oliver and ohio make I beam rods and some other to

aha ok i got it
04-29-2008, 07:45 AM
erik erikson

Quote:

Originally Posted by pat mccarthy

a hair bit bigger on lift 740-730 and @050 cam whould be abit small if added in running lash intake and 268 and 270 @050 on a 108to 110 or lower ch 112to114

I told you we would disagree on the cam selection.
On a BBC I like to run more head and less cam.
04-29-2008, 07:47 AM
erik erikson

Quote:

Originally Posted by camaro76_454

should i go custom grind or there are cams like these available?

If you are looking at custom cams they will want to know what your intake to exhaust ratio is on your cylinder heads.
At least I would anyway.
04-29-2008, 07:54 AM
erik erikson

Quote:

Originally Posted by pat mccarthy

well i done this for a some time :3dSMILE: a big head with a small cam is a Fix s .i think and i would and have used a smaller head with more lift the big engines seam to like mild 700 lift cam i have used smaller cams did not care for them much 268to270 on intake and abit more on the ex seams to work very good

Yes,they do like the .750 area but I try and cut this back some.
My customers don't like it when I tell them the Isky Tool Room valve springs will cost them around $450 for the good ones or we could put the cheap ones in for $300.
04-29-2008, 08:02 AM
erik erikson

Quote:

Originally Posted by pat mccarthy

merlin III and a callies magnum crank and srp pistons or ohio crank 8 plate crank with there I beam rods with the arp2000 bolts

Pat,this sounded great until you brought Ohio into the picture.
For I-beam rods I would not be afraid to try the new Callies/Compstar I- beam rods.
You see,I told you we would not agree on everything
.:LOL:
04-29-2008, 02:38 PM
pat mccarthy

Quote:

Originally Posted by erik erikson

Pat,this sounded great until you brought Ohio into the picture.
For I-beam rods I would not be afraid to try the new Callies/Compstar I- beam rods.
You see,I told you we would not agree on everything
.:LOL:

well i have used the ohio billet rods hey them compstar made in china to:3dSMILE:
04-29-2008, 02:55 PM
pat mccarthy

Quote:

Originally Posted by erik erikson

I told you we would disagree on the cam selection.
On a BBC I like to run more head and less cam.

:LOL: :LOL: :LOL: well let go for a ride at 1500to2000 on the street with them big heads :3dSMILE:
04-29-2008, 02:58 PM
pat mccarthy

Quote:

Originally Posted by erik erikson

Yes,they do like the .750 area but I try and cut this back some.
My customers don't like it when I tell them the Isky Tool Room valve springs will cost them around $450 for the good ones or we could put the cheap ones in for $300.

well they should stay home then:LOL: the iskyloy for the street work great i bet i used more them on the street then you and my dog is bigger then yours:LOL:
04-30-2008, 01:20 AM
tango

1 Attachment(s)

Hay Pat I say my Dog is the Biggest ! :eek: **) :LOL: :LOL: Hay Erik if your not to Busy may-be you can Help me give Old Boy a Bath ? :eek: :LOL:
04-30-2008, 02:13 AM
pat mccarthy

1 Attachment(s)

Quote:

Originally Posted by tango

Hay Pat I say my Dog is the Biggest ! :eek: **) :LOL: :LOL: Hay Erik if your not to Busy may-be you can Help me give Old Boy a Bath ? :eek: :LOL:

well say hello to my little friends:LOL:

Show 40 post(s) from this thread on one page