Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 396 build?
          
   
   

Results 1 to 15 of 15

Threaded View

  1. 02-17-2008 02:02 PM #1
    gameaholic
    gameaholic is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Feb 2008
    Location
    Holt
    Posts
    8

    396 build?

     



    I have purchased a 396 #3855961 block, standard bore 2 bolt main. I also have a set of heads I found that are off a 454,120 cc chamber, they were being built for a hi-perf. boat but the guy never picked them up. They have 2.25 intake and 1.94 exhaust valves. Is it feaseable to use these heads on the 396? And if so what compression and cam should I use? This will be in my 69 Camaro, street use pump gas. But want as much torque as possible.
    Last edited by gameaholic; 02-17-2008 at 02:20 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink