This would give ya 428, but what would you have to do to the rods or pistons to make this work, Thanks.
Printable View
This would give ya 428, but what would you have to do to the rods or pistons to make this work, Thanks.
i did a rotating mass like what you want .you can get the pistons from KB and used a 396-502 set of rods all the same length a 454 crank and you will use the 454 fly wheel and 454 damper then you have what you want.
I've said it before and I'll say it again, "PAT, U DA MAN!" Thanks so much.