Thread: 454ci oil pan
-
10-13-2007 03:27 AM #1
454ci oil pan
Hi everyone!!
I'm Building a 454ci BBC mark IV for my brother for a street/strip use (rarely on the strip) and these are the parts that i used (this engine will be in 1980 Camaro):
Dart pro1 heads
lunati retro hyd. roller camshaft 231/239 duration @0.050" .600"/.600" lift and 110 lobe
speed pro forged pistons .221"dome height (overbored .030)
melling high volume oil pump
fluid damper
edelbrock RPM Air-Gap Manifold
Speed Demon 850cfm
I'm looking for an oil pan that is deeper than the stock oil pan and will fit in this 1980 camaro. any suggestions?
thank you,
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-13-2007 11:33 AM #2
Originally Posted by DennyW
No not yet
-
10-13-2007 11:47 AM #3
Originally Posted by DennyW
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance