Thread: Water in oil
Threaded View
-
08-05-2007 09:30 AM #1
Water in oil
Data: 454, Edelbrock alum heads and intake, Mobil 1, GM engine assembly lube, 200 miles on rebuild
I punctured my radiator, lost coolant in top half of engine. Refilled with water; ran engine without radiator cap, no water in exhaust, no cylinder gas in coolant, no water in oil. Put on rad cap, increased temperature and coolant pressure; got water in oil.
Planning to dis-assemble top end. Suggestions on what to look for? Gasket leaks, cracks?
Suggestions on flushing oiling system and remote oil lines/ remote oil radiator? Plan to remove oil cooler and drain it. Have old distributor set up to pre-prime oil system; thinking of using that to flush the system a few times.
Jim
A radio station in Australia ran a phone in competition to find the most embarrassing moment in listeners' lives. The final four were: 4th Place: While in line at the bank one afternoon my...
the Official CHR joke page duel