the heads are back!!! YAY

Well my BBC heads are back from the shop i put new vavles in "in2.065" "ex1.73"
Springs:
Seat Pressure @ Installed Height 121 lbs. @ 1.800
Open Pressure and Height 298 lbs. @ 1.300
heads where milled .005
Hot tanked for 1 week lol they forgot about them hehehe
Crane Cams roler rockers

here are some pics:
http://i190.photobucket.com/albums/z...2/SUC50022.jpg
http://i190.photobucket.com/albums/z...2/SUC50019.jpg
http://i190.photobucket.com/albums/z...2/SUC50018.jpg
http://i190.photobucket.com/albums/z...lipboard02.jpg
http://i190.photobucket.com/albums/z...pboard01-1.jpg

Looks good. What kind of heads are you running? (I apologize if this has already been stated elswhere).

6272292 Passenger heads ovel port 119CC i got the compreshon up to 9.5:1 lol small world i osted the full list over there

They look good!!! Shouldn't be long now till it's ready to drop in it's new home!!!!

what do u guys think my HP TQ will be at???
my cam was rated at 1400 to 5000

396 Bord .060 + 408 line holed and decked .010
119CC heads ovel port Milled .005 6272292 Passenger heads compreshon up to 9.5:1 - 9.6
Nodular Iron Crankshaft "Balanced" good to 6000 RPM
Speed-Pro Power Forged Pistons P/N:TRW-L2328F30 9.5:1
Speed-Pro Plasma-moly piston rings
Elgin 3/8 Push Rods
Eagle "SIR" 5140 Forged I-Beam Rods W 7/16 ARP bolts
Elgin 21-4N Stainless Valves Intake 2.065 & Exhaust 1.75 vavles
CraneCams 103052 Energizer Cam @ IN216 - EX216 lift .510
CraneCams 13308-1 Valve Springs
Professional Products Damper
Scat SFI Flexplate
Melling High Volume Oil Pump
CraneCams 13744-16 Energizer Full Roller
Pioneer rocker studs
Edelbrock Performer EDL-2161 Aluminium Intake
Comp Cams Timing Gear Drive Sets
ARP Main bolts & Head Bolts

Caution, errors possible **)