Printable View
Ok im sure this has been answered before on here..
Im at the stage of chasing cam specs and thourght i would chas a bit of tried & tested knowlage and or secrets on this wonderful site
Any way my engine consists of LS7 454, Standard balanced forg crank, eagle h beam rods, 8.5 to 1 JE pistons, Dart PRO1 cnc heads, F2 Procharger..
15 psi and 30 psi pullies, turbo 400 gearbox with 4000 stally,
OK any help with solid roller camshaft specs would be gr8,, scott
What gear do you have?Quote:
Originally Posted by gobme
What is the weight of the car?
I have 3.9 in 9 inch diff
weight of car is (estimat) 3900 pounds.. still at shop geeting cage
Another thing to think about is a cam that works well with 15 psi. won't work very well with 30 psi.Quote:
Originally Posted by gobme
I can tell you that at 10lbs. of boost we had a 496 with a mech. roller cam that was .680/.680 lift,the duration was 260/274 at .050 and it was cut on 112 L/S/.
I would have to look for sure but I do know it made over 700 hp at the flywheel on premium pump gas.