Printable View
I just bought a Chevy II that had a 454 tall deck before but with-out the motor in it, so I bouth a 454 short deck since I didn't know that originally it was a tall deck so my headers don't fit. Someone can help me find aluminium heads that have .400 more height so I can fit my motor in! I am looking for a part number or anything that can help me.
Thanks,
Dom
it would be better to make or cut to fit the headers you have .then buy heads a lot of heads dart world have a rised ex ports but that still may not help the tall deck block moves up and out. do you know if the tall deck had rised port you would need much more then 400
My problem is that the headers as you can imagine are molded in the fendermeaning real tuff to modify, my speedshop told me that there is heads made for that but I need to find it, they are .400 raise so its supposed to be a perfect fit, anyway, I was going for Aluminium heads! Thanks for the help brothers
Dom
well i have made headers for chevy II with big blocks just so you know that the headers will not sit on the engine the same just going up 400 they may not fit hit on some thing the block is wider to
Thanks, I will send this info to my speed shop to make sure is not fooling me around, I never knew that there were tall and short deck, I only knew that there were long bloc, maybe this is why they didn't fit on your application?
my application did i say that NO ?? i build them to fit i start with J bends and build them they fit when the car is done .? you mean yours did not if your application :) i have built many tall decks from 525 past 620 cid:D and headers for them this is how i make a liven .Quote:
Originally Posted by ChevyII454