Builing a 402 bbc and was wondering what your thoughts were for camshaft selection. This engine is going in a fiberglass hotrod that will see very little street use. Combo at the moment is:

402 truck 2 bolt block +.030" torque plate honed, zero deck height
new std stroke cast series 9000 scat crankshaft
Scat 6.135" I beam rods
Dome top TRW forgies, comp will be around 11.5:1.
Heads atm are 148 oval port running 2.250 and 1.880 valves ported with nice guide boss work and I've dropped the short turn right down. Obviously the heads are stud mounted with new arp studs and roller rockers are yet to be bought but will be used.
Intake is a oval port victor jnr with dominator flange and I've got a 1050 dominator for it.
I was planning on using this comp cams 11-411-8 NX279HR hyd roller only because I have it sitting but was going to run something a little bit more aggressive like a comp cams solid roller 11-655-47 XE290S.

How much horsepower do you estimate these camshafts would make in this engine?
Has anyone built something similar?

Some of the car specs are: 34 3 window ford, powerglide, 4.33:1 gears on a 33" tyre. Converter will be to suit camshaft.