Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Is this going to be a problem?
          
   
   

Results 1 to 5 of 5

Threaded View

  1. 06-02-2007 04:11 PM #1
    Gusaroo's Avatar
    Gusaroo
    Gusaroo is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jul 2006
    Location
    Glastonbury
    Posts
    371

    Is this going to be a problem?

     



    Well, I was getting ready to paint the block on my 454. As I was taping up the heads around the intake, I noticed the cross over heat riser ports are exposed on the heads...The intake doesn't cover them.

    Is this a problem? Are these under pressure? I believe they are tied into the exhaust ports somehow. I think my intake gaskets will cover these up...

    See these pics...with intake in place:
    http://img66.imageshack.us/img66/7208/heatriser1vd9.jpg
    http://img66.imageshack.us/img66/4818/heatriser2lc7.jpg

    Some pics..without the intake:
    http://img91.imageshack.us/img91/1062/454head1xm8.jpg
    http://img91.imageshack.us/img91/4971/454head2gy1.jpg

    I beleive this is the correct intake for the motor. Its a Edelbrock Performer 2.0 dual plane. The motor is 454 out of '84 c3o wrecker.
    Last edited by Gusaroo; 06-02-2007 at 04:16 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink