BBC ignition wires?

[stylingZ]

What are the BEST ignition wires that I can possibly run on a BBC which will be running a HEI unit and a MSD-6AL? What size of wires and I am hoping they make them in a deeper blue color as opposed to red, yellow, and etc? Hopefully they will be able to withstand the heat in a small engine compartment & being next to coated headers also. Thanks for your advice ahead of time!

[seansz28]

on mine i have a set of Accel Armor Shield Braided Spark Plug wires they are covered in a steel braid for something different also they are the 8mm high performance ones too you can find them on summitracing.com

[camaro76_454]

I got Moroso race wires and they are really good
if u want it here you are the part ###
HEI straight boots (#73615)
HEI 90 degree boots (# 73616)

have fun

[skids72]

I've never had trouble with my MSD 8.5mm wires (BBC 402) but I thinik they only come black or red. I see alot of folks running Taylor wires with MSD and they have many colors available. You'll want at least 8mm wires for that MSD ignition (spring for the bigger 8.5mm ones)

You want to make sure it's a helically wound core wire for HEI/MSD not a solid core wire.

-Chris

[pat mccarthy]

300+ accel universal8.8 black kit is what i have used on many engines no wires can be setting on the headers or like the heat. you need to spend some time and routing them with looms .that will keep your wires happy

[Grumpy 427]

I bought a set of Crane 8.5 wires, less resistance than the MSD wires.

[erik erikson]

on mine i have a set of Accel Armor Shield Braided Spark Plug wires they are covered in a steel braid for something different also they are the 8mm high performance ones too you can find them on summitracing.com

I have used the Accel Amour wires before and noticed a pretty light show under the hood.
I vote for Taylor Volt 50 wires my second choice would be a set of the MSD 8.5's.

[NTFDAY]

I have used the Accel Amour wires before and noticed a pretty light show under the hood.
I vote for Taylor Volt 50 wires my second choice would be a set of the MSD 8.5's.

I agree with Eric, Taylor would be my choice. They're not as expensive as some of the top brands and IMHO they are 300% better than anything Accel makes.

[pat mccarthy]

I have used the Accel Amour wires before and noticed a pretty light show under the hood.
I vote for Taylor Volt 50 wires my second choice would be a set of the MSD 8.5's.

yes they will do that if not grounded and the 300+ are not amour and just fine better than the taylor. ends are to big and get in the way of the big tube headers do they make them in a univ boot ? the 300have them on 12 cars never have any bad thing with them they work good or buy the taylor thunder volt50 less you have a arc welder

[viking]

What, does'nt everybody still use packard 440's