Well, dont change anything at all on MY advice!!! If it's already built, just run it!! If you have the cam card, what are the rest of the numbers? LSA and duration at .050 is what Im curious about. If it says a 2500 stall is good, then so be it. The head numbers in Mortec are just a guide, dont forget that. Just because it says 98cc, dont bank on it. I have seen them be all over the place at times....but also they are right on the mark many times. That's why if I ever have a set of heads that Im going to use, I will always cc them, that way you know for sure. In your case, I would say just use the engine as is. You can always make changes later if there's something you just have to change. But I'll bet you'll like it fine as is. Any big block is tons of fun!! Keep us posted.