Results 1 to 5 of 5
Threaded View
-
04-08-2006 07:42 AM #1
What big block for 1/8 mile drag racing?
Short deck ,tall deck is best?Should I do a big cubic inch short deck or a small cubic inch tall deck?I am using stock closed chamber oval ports too.Engine will be pulling a 65 chevy short bed truck.Do I want to stay with a smaller cubic inch displacement for the shorter track?I am looking for 600-650 horses total,400 on pump gas and a 250 shot of nitrous.ThanksLast edited by BigTruckDriver; 04-08-2006 at 09:33 AM.
Friends dont let friends drive fords!
I worked through the wiring problem, I think it was an undersized wire going to the LS power fuse block getting kinked and causing a high resistance. I replaced the power wires going there with a...
Stude M5 build