Hybrid View
-
09-02-2003 02:20 PM #1
THM400 Not Shifting into 3rd Gear??? HELP!
Please Help us, my dad and i just purchased a show quality 1955 chevy and are having a problem with out tranny . . .it WILL shift into 1st and 2nd right away, but WON'T shift into 3rd . . . the vacuum line is connected, it has a saturday night special torque converter, and most likely a shift kit . . .what can we check? Should we put in a tranny that is lying around our garage that works, or could it be a minute problem that we are overlooking?
any help will be greatly appreciated
thanx
-
09-03-2003 06:14 PM #2
THM400 now working! Thanx for your Help!
We Would like to say thankyou to however it was in this club that anonymously sent us a tip to check the vaccum line. I disconnected the rubber line near the tranny while my dad blew really hard on the carburator end. A chunk of gunk blew out and we now have suction, and best of all we have 3rd gear!!!
Thanx To All
marc and jerry
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy