I have a street 100 over 427 BBC. Last summer after I had body work done on the car, I started it up. It ran fine for a day or two, then I noticed some valve clatter. So I readjusted the valves following the procedure point by point. After, I stated it up, and the noise was gone. However, a few mins later there was another, louder noise comming from the motor. After some investigation and help from other car guys in my area we narrowed it down to being the cam. the cam is said to be "walking out" and hitting the timing chain cover. I've tried just about everything to stop this noise. The best ive done is when I readjusted the valves, the noise seems to stop for a minuite or two, then it will start again. Any suggestions at all would be a ton of help, i really wanna get this car on the road for the upcomming summer.
Thanks all,
Ben